Westerbeke 38B FOUR Operator's Manual Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
5.
Alarm:
The alarm is located above the test button and will sound if the engine's oil pressure falls below
15 psi. In this event, the alarm will emit a pulsating signal. The alarm will also sound if the watertempera-
ture in the fresh water
cooling circuit rises
to
210'
F.
In this event, the alarm will emit continuous sig-
nal.
*6. Water Temperature Gauge: This gauge is graduated in degrees Fahrenheit and is illuminated while the
Key
Switch is turned ON. The engine's normal operating temperature is 170 -
190'
F (77 - 88°C).
*7. Oil Pressure Gauge: This gauge is graduated in pounds per square inch (PSI) and is illuminated while
the Key
Switch is turned ON. The engine's normal operating oil pressure ranges between 30 - 60 PSI.
*NOTE: When the engine is manually shut down, and the engine's Key Switch is turned OFF,
the water temperature gauge
will continue
to
register the last temperature reading indicated
by
the gauge before electrical power was turned OFF. The temperature gauge will
once
again
register the engine's true temperature once
electrical
power
is restored
to
the gauge. The oil
pressure gauge will
fall
to
zero when the engine is manually shut down.
Westerbeke
Diesel
Engines
36
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 107 108

Comments to this Manuals

No comments